Samsung ME40A User Manual page 140

8
Automatic Network Settings
Use the Automatic
To set up your product cable network connection automatically, follow these steps.
How to set up automatically
1
2
3
Manual Network Settings
Use the Manual
address.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
2
3
4
How to set up manually
To set up your product cable network connection manually, follow these steps.
1
2
3
4
5
6
7
8
Downloaded From TV-Manual.com Manuals
Network
Network Settings
Go to the Network Settings
Select Wired, press [ ], and then press [
The network test screen appears and verifies the network connection. When the connection has
been verified, the "Internet is connected successfully." message appears.
If the connection process fails, check the LAN port connection.
If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section, Manual Network Setup.
Network Settings
Right click the Network icon on the bottom right of the screen.
In the pop-up menu that appears, click Status.
On the dialog that appears, click the Support tab.
On the Support Tab, click the Details button. The Network connection values are displayed.
Go to the Network Settings
Select Wired, press [ ], and then press [
verification process starts.
Press [ ]. The verification process stops. Select
IP Settings screen appears.
Select the field at the top, press [
Press the button on your remote to go to the
Enter the first portion of the
keys on your remote. Press the right arrow button to go to the next field.
Enter the next portion of the
Repeat the entry process for each field in the
when connecting your product to a network that supports DHCP.
screen.
] again.
when connecting your product to a network that requires a Static IP
screen.
] again. The network test screen appears and the
IP Settings
], and then set IP Mode
IP Address
IP Address (for example, 105) into the first entry field using the number
IP Address. Press the right arrow button to go to the next field.
IP Address.
on network connection screen. The
to Manual.
entry field, and then press [
8 Network
].
140