7
7.2.2 Antenna
Your TV memorizes channels and adds the memorized channels to the Channel. Before your TV can
memorize channels, you must specify the signal source, either
you start
know your cable system type, contact your local cable company for the information. Most cable
companies use STD.
7.2.3 Auto Program
Scans for channels automatically and stores them in the TV's memory.
1
2
3
4
5
6
Downloaded From TV-Manual.com Manuals
Media
m
MENU
[
]
Media
Auto
Program, you must also specify the cable system type, STD, HRC, or IRC. If you don't
Air
/
Cable
m
MENU
[
]
Media
Select
Air
or
Cable
or both by highlighting and then pressing [
If you selected
Air
or
Select Next, and then press [
If you selected Cable, the
If you selected
Antenna
Select STD, HRC, or IRC, and then press [
Repeat for Analog.
Select Next, and then press [
After all the available channels are stored,
done, the
Auto Program
Channel
Antenna
Channel
Auto Program
Cable
or both on the Antenna screen, your choice will already be selected.
].
Cable System
screen appears. Select Digital, and then press [
only,
Auto Program
starts.
].
].
Auto Program
starts.
Auto Program
menu then reappears. This process can take up to 30 minutes.
[
]
ENTER
Air
or Cable. If you select cable, when
[
]
ENTER
].
removes scrambled channels. When
].
123
7 Media