Normal Vacuuming - Chariot CV28 Operating Instructions Manual

MACHINE OPERATION

NORMAL VACUUMING

Plan the vacuuming pattern in advance. The longest
track is around the perimeter of the area to be
cleaned. For efficient operation, the runs should be
the longest possible without turning or stopping.
In order to achieve the best possible results, the
area which is to be cleaned should be picked up
before vacuuming. Large debris, strings and wire
must be removed to prevent being caught in
brushes.
If machine is allowed to stand in neutral with the
vacuum deck down for more than 2 seconds, the
brush motor stops. If either forward or reverse travel
is selected, the brush motor will continue once
movement of machine begins. Overlap the brush
path and avoid transporting over previously cleaned
areas.
RECOMMENDED PATH
3-11
86037810 CHARIOT® VACUUM 12/16/06
TO BEGIN VACUUMING
When operating the machine around people, pay
close attention for unexpected movement. Use
extra caution around children.
1. Place left foot on operator presence pedal.
Throttle pedal must be in neutral position.
2. Turn machine power on.
3. Check position of Directional Control Switch
to ensure that machine is set to travel in
direction intended.
4. Press the Drive Reset Switch.
5. Lower the Brush Deck.
6. Drive machine forward to begin vacuuming.
7. Adjust the speed of the machine as
necessary.