Swype
Swype lets you enter words by tracing over the letters on the virtual QWERTY keyboard. Instead of
tapping each key, use your finger to trace over each letter of a word. You can also tap letters to enter
words.
Swype provides next-letter prediction and regional error correction, which can compensate for tapping the
wrong keys on the virtual QWERTY keyboards.
Use Swype to Enter Text
1. From a screen where you can enter text drag down from the top of the screen to open the
Notification panel, and then tap Select keyboard > Swype.
2. Swipe your finger continuously over the letters to form a word. As you swipe over letters, words
matching your pattern display at the top of the Swype keyboard. To enter a word, lift your finger,
or tap a word at the top of the keyboard.
3. While entering text, use these options:
If you make a mistake, tap
delete an entire word or field.
By default, Swype starts with a capital at the beginning of text. Tap
capital letter, or tap
Tap
Symbol to switch to a symbols keyboard, and then tap keys to enter symbols.
Tap
Voice input to switch to Google voice typing to enter text by speaking. See
Voice
Typing.
Configure Swype
■
From home, tap
– or –
From the Swype keyboard, touch and hold
Note: For more information about Swype settings, see
Phone Basics
Clear to delete a single character. Touch and hold
Up twice to enter all capitals.
Apps >
Settings >
Language and input > Swype.
Swype.
Swype
Settings.
Clear to
Up to start with a
Google
26