Advertisement
4
Install software
Note:
If your computer does not have a CD/DVD drive or you are
using a Mac, an Internet connection is required to obtain the product
software.
1
Make sure the product is NOT CONNECTED to your
computer.
Windows
:
If you see a Found New Hardware screen, click
®
Cancel and disconnect the USB cable.
2
nsert the product CD or download and run your product's
I
software package:
global.latin.epson.com/Support/L375
3
Follow the instructions on the screen to run the setup
program.
OS X:
Make sure you install Epson Software Updater to receive
firmware and software updates for your product.
4
When you see the Select Your Connection screen, select
one of the following, then continue with the on-screen
instructions:
• Wireless connection
In most cases, the software installer automatically
attempts to set up your wireless connection. If setup
is unsuccessful, you may need to enter your network
name (SSID) and password.
• Direct USB connection
Make sure you have the USB cable.
5
When software installation is complete, restart your
computer.
Mobile printing
To print from a mobile device, your product must be set up for
wireless printing or Wi-Fi Direct
for instructions.
Epson Connect
Solutions
™
Epson Connect offers a variety of remote printing options for
your product. Connect wirelessly from your tablet, smartphone,
or computer. Print documents and photos from across the
room or around the world.
latin.epson.com/connect (website available in Spanish)
Epson iPrint
for iOS/Android
™
Download the Epson iPrint app from Google Play
Store to print documents and photos from your iOS or Android
device on any email-enabled Epson
. See the online User's Guide
®
™
or the App
™
printer.
®
Any problems?
Network setup was unsuccessful.
• For detailed instructions on setting up your product on a
wireless network, see the Wireless Installation Guide.
• Make sure you select the right network name (SSID). The
product can only connect to a network that supports
2.4 GHz.
• If you see a firewall alert message, click Unblock or Allow
to let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. Passwords must be entered in the correct case.
There are lines or incorrect colors in my printouts.
Run a nozzle check to see if any of the print head nozzles are
clogged. Then clean the print head, if necessary. See the online
User's Guide for more information.
Setup is unable to find my product after connecting it
with a USB cable.
Make sure the product is on and securely connected as shown:
Error indicators
If you see one of the error indicators below, follow the steps
here to proceed:
Flashing
Paper is jammed. Remove any jammed paper
from inside the product or from the rear paper
feed slot. Make sure your paper is loaded
correctly, then press
Paper is out or multiple pages have fed into the
rear paper feed slot. Load paper correctly in the
rear paper feed slot, then press
Initial ink charging may not be complete. Be
sure to complete the steps in the "Fill ink tanks"
section.
Wi-Fi connection error. Press the Wi-Fi button
on the product to clear the error and try again.
For detailed instructions on setting up your
product on a wireless network, see the online
Wireless Installation Guide.
Printer error. Turn off the product and check
that no protective material or other foreign
object has been left inside the product.
On
or
.
or
.
Advertisement
