Sony MDR-IF320RK2 Operating Instructions Manual page 5

b To connect to a headphones jack
Transmitter
to AUDIO IN A jacks
Left channel (white)
Right channel
(red)
Connecting cord
(supplied)
Unimatch plug
adaptor
(supplied)
to headphones
jack (stereo
phone plug)
2
If your AC power adaptor is
equipped with a voltage selector,
before connecting the AC power
adaptor to an AC outlet, set it to
the operating voltage in your area
with a screw driver.
AC power adaptor (supplied)
110V 120V
to headphones
jack (stereo
mini plug)
Discman,
WALKMAN*, TV,
VCR, etc.
220V 240V
VOLTAGE
SELECTOR
3
Connect the transmitter to a power
source.
Transmitter
AC power
adaptor
(supplied)
to DC IN
9V jack
Notes
• Do not connect to the AUDIO IN A jack and B
jacks at the same time. If you do so, the audio
signals may be mixed.
• Use only the supplied AC power adaptor. Do
not use any other AC power adaptor.
Polarity of the plug
• If the plug of the AC power adaptor does not fit
in the AC outlet, use the supplied AC plug
adaptor.
• When you connect the connecting cord directly
to an earphone jack, the audio signal will not be
output through the right channel. In such a
case, use the separately sold PC-236HG plug
adaptor.
* WALKMAN is a registered trademark of Sony
Corporation.
01/02-11_MDRIF320RK2.12E
to an AC
outlet
5