Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Makita AT422AZK
Summary of Contents for Makita AT422AZK
- Page 1 Stapler Model: AT422AZK AT422AZ INSTRUCTION MANUAL...
- Page 2 AT422AZK AT422AZ SPECIFICATIONS： 4-7 kg/cm² (60-100 PSI) Air pressure ¢ ¢ ) Applicable length 10mm-22mm( ¢ ¢ Applicable crown 5.10mm( ¢ ¢ Applicable width 1.14mm( ¢ ¢ 0.58mm( Applicable thickness ¢ ¢ Applicable gauge Staple capacity 100pcs. 6.0mm( Min. hose diameter ¢...
- Page 3 SAFETY RULES DANGER：Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING：Indicates a potentially hazardous situation which, if not avoided, will result in death or serious injury. CAUTION：Indicates a potentially hazardous situation which, if not avoided, will result in minor or moderate injury.
- Page 4 WARNING Always disconnect the stapler from the air supply before ANY KIND of adjustment, clearance of jams, service, cleaning, re-locating and during non-operation. Always wear safety goggles with side shields and hearing protection. Employers and users are responsible for ensuring anyone near the stapler is also protected. When the stapler is being loaded or is connected to the air compressor, never place your hand or any other body part in the stapler discharge area.
- Page 5 AIR COMPRESSOR AND CONNECTIONS NOTE：The air pressure required depends on fastener size and type of material to be stapler. Never exceed the air pressure recommended by specifications. If stapler do not drive down tightly, adjust to a higher pressure setting until satisfactory. Reduce air pressure if the fasteners are being driven too deeply.
- Page 6 Stapler Model ：AT422AZK AT422AZ...
- Page 7 Model: AT422AZK AT422AZ Note: The specifications may differ from country to country.
Need help?
Do you have a question about the AT422AZK and is the answer not in the manual?
Questions and answers