Page 1
Radio MODEL: SCD8000 Thank you for purchasing your new SCD8000. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. Read all the safety instructions carefully before use and keep this instruction manual for...
M_SCD8000 / English Instruction Manual REMOTE CONTROL OPERATION To operate the unit with the remote control, point the remote control at the remote sensor on the front panel and press the appropriate button on the remote control. The remote control works best within a range of 6 ~ 7 meters from the front panel and at an angle of 30 degrees.
M_SCD8000 / English Instruction Manual There are 5 function modes; press the FUNCTION button on the unit or remote control to change modes. The 5 modes are: FM MODE: Listen to FM radio broadcasts. DAB MODE: Listen to digital audio broadcasts. ...
M_SCD8000 / English Instruction Manual TUNING TO A RADIO STATION If you know the station frequency that you want to tune to directly: Tune to a station by turning the TUNING dial on the unit or pressing the /TUN.- or /TUN.+ button on the remote control.
Page 7
M_SCD8000 / English Instruction Manual the station list with a “?” in front of the station name. Preset stations To store a station in a preset memory, tune to the station that you want to save as a preset, then press and hold the PROG./P-MODE/M.
M_SCD8000 / English Instruction Manual Software version This displays the current software version. Press the STOP/MENU button to enter menu selection, select the “System” option and press the PLAY/PAUSE/PAIR/SELECT button to enter, select “SW version” then press the PLAY/PAUSE/PAIR/SELECT button to view the current software version.
M_SCD8000 / English Instruction Manual To skip tracks quickly (for MP3 discs, only) To skip 10 tracks at a time, press the FOLDER/MEM/10+ button to skip forward 10 tracks. Press the FOLDER/MEM/10– button to skip backward 10 tracks. To select a desired folder (for MP3 discs, only) To select a track in a folder, press and hold the FOLDER/MEM/10+ button each time to skip forward a folder.
1. Press the FUNCTION button to select “BT MODE”, the pair indicator light will flash. 2. Turn on the Bluetooth function on the device, scan the unit “SCD8000” and connect, then input the password 0000 if required, the light will light up to indicate that the connection is done, and the display will show “CONNECT”.
M_SCD8000 / English Instruction Manual 3. Rotate the Volume control or press the VOL- / VOL+ buttons on the remote control to increase or decrease the volume to your desired level. 4. Press the PLAY/PAUSE/PAIR/SELECT button on the unit or the PAIR/SELECT button on the remote control to disconnect Bluetooth.
Need help?
Do you have a question about the SCD8000 and is the answer not in the manual?
Questions and answers