Adjusting The Audio Settings - Vizio E60-C3 User Manual

ADJUSTING THE AUDIO SETTINGS

Adjusting audio settings creates a custom audio mode which can be
To adjust the audio settings:
1. Press the MENU button on the
remote. The on-screen menu
is displayed.
2. Use the Arrow buttons on the
remote to highlight
press OK. The AUDIO menu
is displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press
Arrow buttons to change
the setting:
• - Turns the
When the TV speakers are set to On, DTS signals cannot
be passed through digital audio outputs.
• Surround Sound - Surround sound uses DTS TruSurround
to deliver an immersive surround sound experience from
the TV's internal speakers. TruSurround completes the
entertainment experience by providing deep, rich bass
and by delivering crisp details and clear, intelligible dialog.
Select On or .
• - Volume leveling uses DTS TruVolume
to maintain consistent volume levels during transitions
between program content, AV formats, and input sources.
Select On or . In a few cases, volume leveling may
VIZIO
AUDIO
TV Speakers
Surround Sound
and
Volume Leveling
-
Balance
-
Lip Sync
Digital Audio Out
Analog Audio Out
Equalizer
Delete Audio Mode
• Balance - Adjusts the loudness of the audio output from
the left and right speakers.
• - Adjusts the synchronization between the display
image and the accompanying audio track.
•
digital audio out and HDMI ARC output when connected to
a home theater audio system or sound bar. Select PCM or
.
On
•
On
the RCA (red & white) connector when connected to a home
On
theater audio system. Select
+
0
external speakers' volume from the TV's volume controls, or
+
0
select
PCM
your home theater system controls.
Fixed
You must select
channels (3.0, 5.0, or 5.1, for example).
•
frequencies using either preset or custom settings. See
Locking and Unlocking Channels on page 48.
•
to the factory defaults by deleting the custom mode
previously created. See Deleting the Custom Audio Mode
™
on page 34.
4.
EXIT button on the remote.
™
33
- Changes the type of processing for
- Sets the volume control properties for
to control the
to control the external speakers' volume from
for audio with more than two
- Restores audio equalizer settings
5