Adjusting The Audio Settings - Vizio E32-C1 User Manual

ADJUSTING THE AUDIO SETTINGS

Adjusting audio settings creates a custom audio mode which can be
further modified or restored to factory defaults (deleted).
To adjust the audio settings:
1. Press the MENU button on the
remote. The on-screen menu
is displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The AUDIO menu
is displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
• TV Speakers - Turns the
built-in speakers on or off.
When the TV speakers are set to On, DTS signals cannot
be passed through digital audio outputs.
• Surround Sound - Surround sound uses DTS TruSurround
to deliver an immersive surround sound experience from
the TV's internal speakers. TruSurround completes the
entertainment experience by providing deep, rich bass
and by delivering crisp details and clear, intelligible dialog.
Select On or Off.
• Volume Leveling - Volume leveling uses DTS TruVolume
to maintain consistent volume levels during transitions
between program content, AV formats, and input sources.
Select On or Off. In a few cases, volume leveling may
artificially suppress volume increases, making it difficult to
hear dialog or flattening sudden noises. If this occurs, turn
VIZIO
AUDIO
TV Speakers On
Surround Sound On
Volume Leveling On
-
+
Balance 0
-
+
Lip Sync 0
Digital Audio Out PCM
Analog Audio Out Fixed
Equalizer
Delete Audio Mode
™
™
32
volume leveling off.
• Balance - Adjusts the loudness of the audio output from
the left and right speakers.
• Lip Sync - Adjusts the synchronization between the display
image and the accompanying audio track.
• Digital Audio Out - Changes the type of processing for
digital audio out and HDMI ARC output when connected to
a home theater audio system or sound bar. Select PCM or
Bitstream.
Wide Zoom Normal Panoramic
• Analog Audio Out - Sets the volume control properties for
the RCA (red & white) connector when connected to a home
theater audio system. Select Variable to control the
external speakers' volume from the TV's volume controls, or
Exit 2D 3D
select Fixed to control the external speakers' volume from
your home theater system controls.
ABC
You must select Bitstream for audio with more than two
Input Wide CC
channels (3.0, 5.0, or 5.1, for example).
• Equalizer - Adjusts the boost or attenuation of different
frequencies using either preset or custom settings. See
Sleep
Picture Audio
Timer
Locking and Unlocking Channels on page 47.
• Delete Audio Mode - Restores audio equalizer settings
to the factory defaults by deleting the custom mode
previously created. See Delete the Custom Audio Mode on
Network Settings Help
page 33.
4. When you have finished adjusting the audio settings, press the
EXIT button on the remote.
5