Remote Control - Denon DNP-730AE Owner's Manual

Contents Connections
q w e rt y u
AUDIO OUT DIGITAL AUDIO
OPTICAL
R L
A Rod antennas for wireless LAN
Stand this antenna upright when connecting to a network via wireless
LAN. (v p. 22)
90°
320°
Front panel Rear panel
Playback
i q
WI-FI IR NETWORK WI-FI
CONNECT CONNECT
OUT CONTROL
OUT
AC IN
WPS IR iOS
TO DENON
DCD OR PMA
90°
320°

Remote control

unit
Settings
The antenna clip can be removed from the rear panel.
A Rotate the antenna clip 90 degrees to the left.
B Pull the antenna clip out towards yourself.
0 The antenna clip is needed when transporting this unit. Keep it in a safe
place.
0 Attach the antenna clip by following the steps for removing it in reverse.
B AUDIO OUT connectors
Used to connect devices equipped with analog audio inputs connectors
or an external pre-main amplifier. (v p. 17)
C DIGITAL AUDIO OUT connector
Used to connect an AV receiver or D/A converter equipped with digital
audio input connectors. (v p. 18)
D Wi-Fi Connect Button (Wi-Fi CONNECT WPS)
Connects to a wireless LAN.
(See the separate "Quick Start Guide".)
E IR CONTROL OUT connector
Connects to a Denon amplifier or CD player that is equipped with a
REMOTE CONTROL jack. (v p. 24)
F NETWORK connector
Used to connect this unit to the network. (v p. 21)
G Wi-Fi Connect Button (Wi-Fi CONNECT iOS)
Connects to iOS.
(See the separate "Quick Start Guide".)
H AC inlet (AC IN)
Used to connect the supplied power cord. (v p. 25)
11
Index
Tips Appendix