Power Management Modes; Pin Assignments - Dell E198FP User Manual

Temperature:
Operating
Nonoperating
Humidity:
Operating
Nonoperating
Altitude:
Operating
Nonoperating
Thermal dissipation

Power Management Modes

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use.
This is referred to as Power Save Mode*. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically
"wake up". The following table shows the power consumption and signaling of this automatic power-saving feature:
VESA Horizontal
Modes Sync
Normal Active
operation
Active-off Inactive
mode
Switch off
NOTE: The OSD functions only in the 'normal operation' mode. Otherwise one of the following
messages appears depending upon the selected input.
In Power Save Mode
Press computer power button
or any key on keyboard or move mouse
Activate the computer and wake up the monitor to gain access to the OSD.

Pin Assignments

VGA Connector
Pin
Number
1
2
3
4
5
6
7
8
9
Downloaded from ManualMonitor.com Manuals
Vertical Video
Sync
Active Active Green
Inactive Blanked Amber
- - - Off
15-pin Side of the
Connected Signal Cable
Video-Red
Video-Green
Video-Blue
GND
Self-test
GND-R
GND-G
GND-B
Computer 5V/3.3V
5¢X to 35¢XC (41¢X to 95¢XF)
Storage: 0¢X to 60¢XC (32¢X to 140¢XF)
Shipping: -20¢X to 60¢XC(-4¢X to 140¢XF)
10% to 80% (noncondensing)
Storage: 5% to 90% (noncondensing)
Shipping: 5% to 90%(noncondensing)
3,657.6 m (12,000 ft) max
12,192 m (40,000 ft) max
138.44 BTU/hour (maximum)
129.92 BTU/hour (typical)
Power Power Consumption
Indicator
40.6 W (maximum)*
38.1 W (normal)**
Less than 2 W
Less than 1 W
* With Audio
** Without Audio