Dell E198FP User Manual page 32

The monitor will not go into
power saving mode.
No Input Signal when user
controls pressed
Back to Contents Page
Downloaded from ManualMonitor.com Manuals
No picture, the LED light is green. When press "+",
"-" or "Menu" key, the message " No input signal "
will appear.
No picture, the LED light is green. When press "+",
"-" or "Menu" key, the message " No input signal "
will appear.
The OSD Lock is On. Press the menu button
l
for 15 seconds to unlock the OSD menu.
Move mouse or hit any key on the
l
keyboard on the computer or activate
video player, then access the OSD to set
both Audio/Video to " off " state.
Check the signal source Make sure the
l
Computer is not in power saving by moving
mouse or pressing any key on the
keyboard.
Check whether the signal cable is plugged
l
in and seated properly. Re-plug the signal
cable if necessary.
Re-boot the computer or video player.
l