Attaching The Stand; Organizing Your Cables - Dell E198FP User Manual

Back to Contents Page
Using Your Monitor Stand
Dell™ E198FP Flat Panel Monitor
Attaching the Stand
Organizing Your Cables
Using the Tilt
Removing the Stand

Attaching the Stand

NOTE: Stand is detached when the monitor is shipped from the factory.
1. Place the stand on a flat surface.
2. Fit the groove on the back of the monitor onto the two teeth of upper stand.
3. Lower the monitor so that the monitor mounting area snaps on/locks to stand.

Organizing Your Cables

Downloaded from ManualMonitor.com Manuals