Springfree R54 Manual page 8

5
NOTE - As you install the white mat rods into the mat rod sockets the net will become tight
against the frame. Handle the net with care and be sure that it does not get caught or it may
tear.
Locate the blue
frame.
Holding the net so that the blue tag is facing you, gently place the rest of the net inside the frame as
shown. DO NOT let go of the blue
Put a white mat rod through the hole to the immediate left of the blue
mat rod socket next to the blue
Then, working carefully around the frame, insert the remaining white mat rods through the net holes and
into the corresponding mat rod socket. When finished, the net should be stretched tightly around the
OUTSIDE of the frame.
Be sure that the white mat rods are seated down to the bottom of each mat rod socket.
tag on the bottom edge of the net and match it with one of the blue stickers on the
tag.
sticker.
SCAN HERE or visit http://springfr.ee/g4-step-5 for a helpful installation video for Step 5.
tag in the net and then into the