Onboard Devices Configuration - Acer 510 Series User Manual

510.book : 510-5.fm Page 97 Thursday, March 4, 1999 1:03 PM
Parameter

Onboard Devices Configuration

The Onboard Devices Configuration screen contains
parameter settings for your hardware connection devices.
Caution: The parameters in this screen are for
advanced users only. You do not need to change the
values in this screen because these values are
already optimized.
The following table describes the parameters in this screen.
Settings in boldface are the default and suggested
parameter settings.
Parameter
Serial Port
Chapter 5 Software
Description
Hard Disk Enables boot-up from the hard disk drive.
Description
Enables or disables the serial port.
Options: Enabled or Disabled
Base Address Sets the I/O address of the serial port.
Options: 3F8h, 2F8h, 3E8h or 2E8h
BIOS Utility
97