System Utilities
5.3.3 Onboard Devices Configuration
The Onboard Devices Configuration screen
contains parameter items that are related to port
devices on your computer.
Serial Port ------------------------- [Enabled]
Base Address ------------------ [3F8h]
IRQ -------------------------------- [4]
IrDA FIR --------------------------- [Enabled]
Base Address ------------------ [2F8h]
IRQ -------------------------------- [3]
DMA ------------------------------ [3]
Internal Modem ----------------- [Enabled]
Base Address ------------------ [3E8h]
IRQ -------------------------------- [11]
Parallel Port ---------------------- [Enabled]
Base Address ------------------ [378h]
IRQ -------------------------------- [7]
Operation Mode --------------- [Bi-directional]
ECP DMA Channel ----------- [-]
Press ↑ ↑ and ↓ ↓ to move the highlight bar; press → →
and ← ← to change the setting of the highlighted
parameter. To exit this screen and return to the
main screen, press Esc.
The following table describes the parameters in
this screen. Settings in boldface are the default
and suggested parameter settings.
5-18
Onboard Devices Configuration
↑ ↑ ↓ ↓ =Move Highlight Bar, → → ← ← =Change Setting, Esc=Exit