Remote Control - Panasonic CS-RE18LKR Operating Instructions Manual

Press and hold for 5 seconds to dim or restore the
8
unit's indicator brightness.
Press and hold for approximately 10 seconds to
9
show temperature setting in °C or °F.
Press and hold for approximately 5 seconds to show
10
12-hour (am/pm) or 24-hour time indication.
11 Press to restore the remote control's default setting.
12 Not used in normal operations.
NOTES NOTES
• and can be activated in all modes
and can be cancelled by pressing the respective
button again.
• and cannot be activated at the same
time.
TO SET THE TIMER TO SET THE TIMER
• To turn ON or OFF the unit at a preset time.
Select ON or
Set the time
OFF timer
• To cancel ON or OFF timer, press
press .
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation at
back cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
resumed) by pressing
Confi rm
or then
.
5