Using The Flash - Olympus C-300 ZOOM Reference Manual

Using the flash

In the auto-flash mode (factory default setting), the flash is designed to fire
automatically when shooting under low light or against strong backlight, but
you can change the flash mode to suit different shooting situations. Select the
flash mode best suited to the light conditions and the effect you want to
achieve.
1
Open the lens barrier fully.
The camera turns on in the shooting
2
mode.
2
Press
The current flash setting is displayed.
3
Press
setting is displayed.
Each time you press
changes in the following sequence:
AUTO -
4
Take the picture.
• The flash working range is approximately 3.4 m/11.2 ft.
• The camera returns to the auto-flash mode (factory default setting)
when the lens barrier is closed. "Saving the settings (All Reset)" (
p.110)
54
.
while the current flash
, the flash mode
- - .
AUtO