Olympus C-300 ZOOM Reference Manual page 75

Selecting the ISO sensitivity
5
Press
ISO settings: AUTO, 100, 200 or 400,
then press
The ISO value is set.
To close the menu, press
6
Take the picture.
The ISO value returns to AUTO (factory default setting) when the lens
barrier is closed. "Saving the settings (All Reset)" (
• Higher ISO settings produce more electrical noise.
• The ISO is standardized based on the sensitivity of normal camera
film. The scale is approximate.
• When the ISO is set to AUTO and you are shooting in dark conditions
without a flash, the ISO automatically increases, otherwise the
4
shutter speed will be reduced, possibly resulting in camera
movement and blurred images.
• If the subject is too far away for the flash illumination to reach when
the ISO is set to AUTO, the ISO is automatically increased.
74
to select one of the
.
again.
DRIVE
AUtO
ISO
100
DIGItAL ZOOM
PANORAMA 200
400
2 IN 1
p.110)