Making Ice - Samsung rf62qepn User Manual

When selecting the temperature, the set temperature
is displayed initially for 5 seconds, then the actual
temperature is displayed.
(There may be slight difference between the set
temperature and displayed actual temperature,
but it will be corrected to the set temperature
automatically.)
- The Freezer temperature will change
depending on the number of door
openings, quantity of food, ambient
temperature, etc.
- The temperature display will blink when freezer
temperature increases due to frequent door
opening, keeping warm food, etc.
(Blinking will stop when the refrigerator reaches
normal temperature. If for some reason it does not
stop after a long period of time, contact a Samsung
service center.)
Fridge
4
If you want to control the fridge temperature, follow
as below.
Press the Fridge Button (Refer the picture)
- The temperature can be set in 1ºC interval
between 1ºC and 7ºC.
When selecting the fridge temperature, the set
temperature is displayed initially for 5 seconds, then
the actual temperature is displayed.
(There may be slight difference between the set
temperature and displayed actual temperature,
but it will be corrected to the set temperature
automatically.)
- The Fridge temperature will change
depending on the number of door
openings, quantity of food, ambient
temperature, etc.
- Temperature of each shelve or container in the
fridge may be different.
- The temperature display will blink when fridge
temperature is increases due to frequent door
opening, keeping warm food, etc.
22_ operating
(Blinking will stop when the refrigerator reaches
normal temperature. If for some reason it does not
stop after a long period of time, contact a Samsung
service center.)
Power Cool
5
Press the Power Cool Button. (Refer to the picture.)
- The Power cool light on the display goes on
(see the arrow mark) and this function begins to
operate regardless of the set fridge temperature.
Press the Power Cool Button again to cancel this
function.
- The light goes off and it operates at the set fridge
temperature again.
The Power Cool function operates for 2 and a
half hours regardless of the set temperature.
E.Saver Button
6
Press the Energy Saver button for better energy
efficiency. If water drops appear on the doors, turn
the Energy Saver function off.

MAKING ICE

Auto Ice Maker Model
The ice maker will produce 8
cubes per cycle - approximately
100~130 cubes in a 24-hour
period, depending on freezer
compartment temperature,
room temperature, number of
door openings and other use
conditions. Throw away the first few batches of
ice to allow the water line to clear. Be sure nothing
interferes with the sweep of the feeler arm. When the
bin fills to the level of the feeler arm, the icemaker
will stop producing ice.
After the icemaker has been turned on again, there
will be a time delay before the icemaker resumes
operation.
It is normal for several cubes to be joined together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink. So if you
don't want to make ice, press the Ice Off button.
When "Ice making" function is selected,ice-
making is priority, Then the temperature of freezer
will be lower than the setting temperature. If you
don't need the "Ice making" function,please press
the button of "Ice Off".