Samsung rf62qepn User Manual page 17

How to reverse the door (OPTION)
Unplug the refrigerator or disconnect the power.
Refer to the page 15, 16 for disassembling the door.
Cap
Cover
1. Remove 2 screws.
2. Separate front leg Cover.
7. Separate low hinge shaft
by using 5/32" wrench and
disassemble low hinge leg
by turning it colockwise,
and then assemble the low
hinge by turning it over.
10. The middle hinge for
reversing a door can be
found in the fridge.
Cap
3. Separate the Cap of the
front leg Cover. (pull out
inside of Cap)
4. Insert the Cap on the other
side of the front leg Cover.
8. Reattach the former right
hinge on the left side and
the former left hinge on the
right side by using 2bolts.
11. Change the middle hinges
assembled at refrigerator
to the middle hinges in the
fridge with handles.
5. Remove 2 bolts of each
hinge with the 10mm
wrench.
6. Place them in front of each
side.
9. Separate stopper by
removing 1 screw on the
right lower side of freezer
and assemble the stopper
on the left side by reversing
it.
12. Use the black hinge
cap of the middle hinge
assembled at refrigerator.
Then place it at the bottom
of the left middle hinge
supplied separately.
Use the Flat-blade screwdriver(-).
setting up _17