■ Audio
TV Issues
Lots of noise is
heard.
The sound cuts out
◀
intermittently.
The audio volume
is different for some
channels.
Possible Causes
•
The broadcast signal may be
weak or unstable.
•
The broadcast signal may be
weak or unstable.
•
This problem can occur because
the audio volume sent from your
wired or cable broadcasting
service provider is set at different
levels.
•
Change the audio mode from stereo to
mono.
•
Contact your wired or cable broadcasting
service provider. (If you are using a
community antenna broadcasting
system, contact your building
administration office.)
•
Contact your wired or cable broadcasting
service provider. (If you are using a
community antenna broadcasting
system, contact your building
administration office.)
•
Enable
change the channel.
English
Solutions
on the TV and
Auto Volume
▶