I want to start Anynet+.
I want to exit Anynet+.
The message
"Connecting to Anynet+
◀
device..." appears on the
screen.
The Anynet+ device does
not play.
•
Check if the Anynet+ device is properly connected to the TV and
check if the
Anynet+ (HDMI-CEC)
Setup menu.
•
Press the 간편메뉴 button to display the Anynet+ menu and select
a menu you want.
•
Select
in the Anynet+ menu.
View TV
•
Press the TV/외부입력 button on the TV remote control and select
a non- Anynet+ device.
•
You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
•
Use the remote control after the TV has finished Anynet+
configuration or has finished switching to Anynet+.
•
You cannot use the play function when
in progress.
English
is set to
in the Anynet+
On
(initial setup) is
Plug & Play
▶