Sony PCS-G70 Operation Manual page 39

3
Select "Dial", or press the CONNECT/DISCONNECT (
on the Remote Commander to call the remote party.
Use the V, v, B or b button on the Remote Commander to select "Dial", then
press the PUSH ENTER button. Or press the CONNECT/DISCONNECT
(
and "Dialing" appears.
When the system connects to the remote system, the "Meeting starts!" message
appears and the following screen is displayed.
Local picture
If the following dialog is displayed after Step 3
The above dialog appears when "More Options Enable" in the Dial Setup menu
is set to "On".
10
GB
Calling a Remote Party
/ ) button on the Remote Commander and the system begins dialing
Dial?
TOKYO
192.168.1.57
More options Dial Cancel
Cancel a call.
Call a remote party.
Change the communication settings.
) button
/
Remote picture