Chapter 4: Using The Printer; Configuring The Printer - CognitiveTPG A798 User Manual

Chapter 4: Using the Printer

Configuring the printer

The configuration menu allows the user to set general printer parameters. The test prints the diagnostics form, which
details settings for all functions. The printer will partially cut the paper between each variation.
The printouts may vary for each model. The test ends with a partial cut of the paper. A complete test printout may require
the use of several feet of paper.
Since the printer is usually shipped pre-configured, most users do not need to change the configuration of the printer. If
you make adjustments to the configuration, be careful not to inadvertently change settings that may affect the printer's
performance. CognitiveTPG does not recommend that users change the printer configuration.
Additional information on configuring the printer is found in the A798 Programming Guide.
Hint: The printer is shipped with a test printout that includes the preset configuration. If you run into problems after
changing the printer configuration, use these settings as a default. For guidance or assistance, you may contact an
CognitiveTPG representative.
10/2013 10/2013 A798-UG00001 Rev. E1 A798-UG00001 Rev. E1
Chapter 4: Using the Printer
A798 Thermal Receipt Printer: User Guide A798 Thermal Receipt Printer: User Guide
19