Video input jack
You will enjoy standard quality images.
SVIDEO input jack
You will enjoy high quality images.
Component video input jacks
You will enjoy accurate color reproduction
and high quality images.
If your TV accepts progressive 480p format
signals, use this connection and set
"PROGRESSIVE (COMPONENT OUT
ONLY)" in "SCREEN SETUP" to "ON"
(page 57) to output progressive signals.
HDMI/DVI input jack
Use a certified Sony HDMI cord to enjoy
high quality digital picture and sound through
the HDMI OUT jack.
To connect to a TV with OVI input
Use an HDMI-DVI converter cord (not
supplied). The DVI jack will not accept any
audio signals, so you have to use another
audio connection in addition to this
connection (page 18). Furthermore, you
cannot connect the HDMI OUT jack to DVI
jacks that are not HDCP compliant (e.g., DVI
jacks on PC displays).
When connecting to a standard
Depending on the disc, the image may not fit
your TV screen. To change the aspect ratio,
see page 56.
• If the picture appears too white when you are
connection, set "BLACK LEVEL"
in "SCREEN SETUP" to "OFF' (page 57).
• Be sure to disconnect the HDMI cord when
moving the player.
• Do not apply too much pressure to the cabinet
wall, if you place the player on the cabinet with
the HDMI cord connected. It may damage the
HDMI OUT jack or the HDMI cord.
• When connecting or disconnecting, do not screw
in or rotate the HDMI connector.
• Do not connect a VCR, etc., between your TV and
the player. If you pass the player signals via the
VCR, you may not receive a clear image on the
TV screen. If your TV has only one audio/video
input jack, connect the player to this jack.
Insert the HOMI connector straight into
the HOMI OUT jack.
Do not bend or apply force to the HDMI
When connecting to a Sony TV that is
compatible with the CONTROL FOR HDMI
function, see page 17.
When connecting to the HOMI OUT jack
Follow the steps below. Improper handling
may damage the HDMI OUT jack and
Carefully align the HOMI OUT jack on
the back of the player and the HOMI
connector by checking their shapes.
Make sure the connector is not upside
down or tilted.