Canon PIXMA MP470 series Quick Start Manual page 73

I
Your machine is not selected in Printer
on the Print dialog box.
M
• Error No.: 300 Is Displayed
Confirm that the Power lamp is lit green.
If the Power lamp is off, turn the machine on.
I
While the Power lamp is flashing green, the machine is initializing. Wait until the
I
Power lamp stops flashing and remains lit green.
If the Alarm lamp is lit orange, an error may have occurred on the machine. For
k
details on how to resolve the error. see "An Error Message Is Displayed on the
LCD" on page 57.
The machine is not connected properly.-
J--"CM--a=k-e"s"u-'=re:':"t:E'h--a~t " th~e~USB
cable is securely plugged in to the machine and the
computer.
• If you are using a relay device such as a USB hUb, disconnect it, connect the
machine directly to the computer, and try printing again. If printing starts
normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.
• There could also be a problem with the USB cable. Replace the USB cable
I
and try printing again.
~
Select your machine's name in Printer on the Print dialog box.
I
If your machine's name does not appear in Printer, follow the procedure below
II
I
to check that the driver for your machine is installed to your computer.
(1)Select Print & Fax Preferences in Printer.
i
In Mac OS X v.10.2.8 or 10.3.x, select Edit Printer List in Printer.
(2)Check that your machine's name is displayed in the list of printers and that
the check box is selected.
I
In Mac OS X v.1 0.2.8, check that your machine's name is displayed in
l
Printer List.
~ 3)lf your machine's name is not displayed, click Add(+) to add the machine. ~
If you cannot add the machine, follow the procedure described in your setup
sheet to reinstall the MP Drivers.
- - - - - - - - - - - - - -
- - ~ _
..
_--------------_._._----~_._._------
- - - -
M
• Error No.: 1700/1710 Is Displayed
See "The ink absorber is almost full. Press [OK] to continue printing. Contact the
serv.ice center." in "An Error Message Is Displayed on the LCD"
~Eage
57.
M
• Error No.: 2001 Is Displayed
I See "The ink absorber is almost full. Press [OK] to continue printing. Contact the
service center." in "An Error Message Is Displayed on the LCD" on page 57.
No response from connected digital
I
camera or video camcorder. /
Connected digital camera or video
camcorder is not compatible with this
I
machine.
I
.
.~_~
. ..J
Troubleshooting
69