Error Message Appears On The Computer Screen - Canon PIXMA MP470 series Quick Start Manual

Error Message Appears on the Computer Screen
• Writing Error/Output Error/Communication Error
----_.~----
The machine is not ready.
L -.-~----
-. -
Printer port setting does not match the
computer's intenace connecting the
machine.
The machine is not connected properly.
MP Drivers are not installed properly.
Confirm that the Power lamp is lit green.
If the Power lamp is off, turn the machine on.
While the Power lamp is flashing green, the machine is initializing. Wait until the
Power iamp stops flashing and remains lit green.
If the Alarm lamp is lit orange, an error may have occurred on the machine. For
details on how to resolve the error, see "An Error Message Is Displayed on the
LCD" on page 5_7_. _
Check the printer port settings.
• In the following instruction, ·XXX" signifies your machine's name.
(1 )Log into a user account with the administrator privilege.
(2)Click Control Panel, then Printer under Hardware and Sound.
In Windows XP, click Control Panel, Printers and Other Hardware, then
Printers and Faxes.
In Windows 2000, click Control Panel then Printers.
(3) Right-click the Canon XXX Printer icon, then select Properties.
(4)Click the Ports tab to confirm the port settings.
Make sure that a port named USBnnn (where "n" is a number) with Canon
XXX Printer appearing in the Printer column is selected for Print to the
following portIs).
If the port setting is not correct, reinstall the MP Drivers or change the port
_ setting according to the intenace you _a_re_u_s_i_n"g_. _
Make sure that the USB cable is securely plugged in to the machine and the
computer.
• If you are using a relay device such as a USB hub, disconnect it, connect the
machine directly to the computer, and try printing again. If printing starts
normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.
• There could also be a problem with the USB cable. Replace the USB cable
and try printing again.
I
The MP Drivers may not be installed property. Uninstall them follOWing the
I
procedure described in the PC Printing Guide on-screen manual and reinstall
them following the procedure
described...!.~
your setup shee_t.__
~
.._. __
~_.
68 Troubleshooting