Table of Contents
Advertisement
Installation
Strong
and even floor
A proper
distance from
adjacent items
Where water
supply can be
easily connected
in a dry place
Where it is free
from heat
11
Where to install
Unstable installation may cause vibration and
noise. If the floor to install the refrigerator on
is not even, make the refrigerator level by
rotating the height adjusting screw.
Carpet or floor covering on which a
refrigerator is installed may be discolored by
heat from the bottom of the refrigerator.
Do not allow carpet or flooring to block
airflow under the refrigerator.
To ensure proper air circulation around the
refrigerator -freezer, please maintain define
sufficient space on both the sides as well
as top and maintain at least 2 inches (5 cm)
from the rear wall.
Select a place where a water supply can be
easily connected between the automatic
icemaker and dispenser.
Installing the refrigerator in a wet or damp
area may cause rust and may be an electrical
hazard.
If this refrigerator is installed where the
ambient temperature is high, the freezing
capacity is deteriorated and the cost of
electricity used increases.
NOTE
Install the refrigerator at a place where the ambient temperature is 41˚F ~ 110˚F
•
(5˚C ~ 43˚C).
Ambient temperature outside this range may cause product malfunction. Also, the
tube between the dispenser and automatic ice maker may freeze.
Height
More than
2"(5 cm)
to back
Bottom Pad
Advertisement
Table of Contents
