Canon VIXIA HFM30 Quick Manual page 96

* Touch this option if you want to physically erase all the data rather than just clear
the file allocation table of the memory.
** If you selected the [Complete Initialization] option, you can touch [Cancel]
to cancel the initialization while it is in progress. All recordings will be erased and
the memory can be used without any problem.
IMPORTANT
• Initializing the memory will permanently erase all recordings. Lost origi-
nal recordings cannot be recovered. Make sure you save important
recordings in advance using an external device (0 126).
• Initializing a memory card will permanently erase any music files you
may have transferred to the card. (e The music files that come
pre-installed in the built-in memory will be restored after it is initialized.)
- Windows users: Use the supplied software ImageMixer 3 SE to
transfer music files from the supplied Camcorder Supplemental Disc
to a memory card after it is initialized. For details, refer to the
'ImageMixer 3 SE Software Guide' (PDF file).
- Mac OS users: Use Finder to transfer music files from the [MUSIC]
folder on the supplied Camcorder Supplemental Disc to a memory
card after it is initialized. Refer to About the music files (0 203) for the
folder structure of the memory card.
• At the time of purchase, Eye-Fi cards contain the necessary network
configuration software. Be sure to install the software and complete the
required configuration setup before you initialize the Eye-Fi card prior to
using it with this camcorder.
8
[OK]
Š
41
Preparations