Canon VIXIA HFM30 Quick Manual page 36

36
Quick Start Function
o
IMPORTANT
• Do not disconnect the power source during standby mode (while the
ONI
OFF (CHG) indicator is lit in orange).
(D
NOTES
• If you close the LCD panel under some circumstances (for example while
the memory card slot cover is open or when the battery charge is too low),
the camcorder may not enter the standby mode. Check that the indicator
changes to orange.
• The camcorder will power off automatically if left in standby mode for 10
minutes. In that case, press
[POWER)
to turn on the camcorder. You can
select the length of time until shut-off or turn off the Quick Start function.
See [Power Saving Mode]
(~
PDF) 160) for details.
• You can use the Quick Start function also in the flexible recording modes in
the same manner.