Samsung pn63c550 User Manual page 31

9. When done, press the Blue button on your remote. The
Network Connecting screen appears.
10. Wait until the connection confirmation message is
displayed, and then press the ENTER button. The
Network Setup screen re-appears.
11. To test the connection, press the
select Network Test, and then press the ENTER
button.
Network Setup (Ad-Hoc)
You can connect to a mobile device without an access point
through the "Samsung Wireless LAN Adapter" by using a
peer to peer network.
How to connect to new Ad-hoc device
1. Follow Steps 1 through 6 in the "How to set up using
PBC (WPS)" (p. 30).
2. Choose Select a network. A list of devices/networks
appears.
3. While in the device list, press the Blue button on the
remote.
✎
The message The existing network system
may have limited functionality. Do you want to
change the network connection? is displayed.
4. Input the generated Network Name (SSID) and
Security Key into the device you want to connect.
How to connect an existing Ad-hoc device
1. Follow Steps 1 through 6 in the "How to set up using
PBC (WPS)" (p. 30).
2. Choose Select a network. The Device/Network list
appears.
3. Select the device you want in the Device list.
4. If security key is required, input the security key.
✎
If network doesn't operate normally, check
the Network Name (SSID) and Security Key
again. An incorrect Security Key may cause a
malfunction.
Network Setup (Manual)
If the other methods do not work, you need to enter the
Network setting values manually.
Getting the Network Connection Values
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support tab, click the Details button. The
How to set up manually
To enter the Network connection values manually, follow
these steps:
RETURN button to
1. Follow Steps 1 through 6 in the "How to set up using
2. Press the
3. Press the
4. Use the number buttons to enter numbers.
5. When done with each field, use the
6. Enter the IP Address, Subnet Mask, and Gateway
7. Press the
8. Press the
9. When done, press the
10. Go to Step 4 in the "How to set up automatically"
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet
because your ISP has permanently registered the
MAC address (a unique identifying number) of your
PC or modem, which it then authenticates each time
you connect to the Internet as a way of preventing
unauthorized access. As your TV has a different MAC
address, your ISP can not authenticate its MAC address,
and your TV can not connect.
To resolve this problem, ask your ISP about the
procedures required to connect devices other than a PC
(such as your TV) to the Internet.
If your Internet service provider requires an ID or password
to connect to the Internet, your TV may not be able to
connect to the Internet. If this is the case, you must enter
your ID or password when connecting to the Internet.
The internet connection may fail because of a firewall
problem. If this is the case, contact your Internet service
provider.
If you cannot connect to the Internet even after you have
followed the procedures of your Internet service provider,
please contact Samsung Electronics at 1-800-SAMSUNG.
Network settings are displayed.
PBC (WPS)" (p. 30).
button to select Internet Protocol Setup,
and then press the ENTER button. Press the
or button to select Manual, and then press the
ENTER button.
button to go to the first entry field (IP
Address).
successively to the next field. You can also use the other
arrow buttons to move up, down, and back.
values.
or button to go to DNS.
button to go to the first DNS entry field.
Enter the numbers as above.
button to go to Select a
Network. Select your network, and then press the
ENTER button.
(p. 30), and follow the directions from that point on.
button to move

English