Onboard Device Configuration - Acer 505 series User Manual

Parameter
Boot Drive
Sequence
Boot from
CD-ROM
Floppy
Hard Disk

Onboard Device Configuration

The Onboard Device Configuration screen contains parameter settings for your
hardware connection devices.
Caution: The parameters in this screen are for advanced users only. You do
not need to change the values in this screen because these values are already
optimized.
Description
Allows you to set the sequence wherein the computer will boot 1st,
2nd, and so on. Below are possible boot devices.
Enables boot-up from the CD-ROM drive, if selected as the first
option. The computer attempts to boot from the CD-ROM drive
(looks for a bootable CD-ROM) before following the boot sequence
specified in the Boot Drive Sequence.
Enables boot-up from the floppy disk drive, if selected as the first
option. The computer attempts to boot from the floppy disk drive
(look for a bootable floppy) before following the boot sequence
specified in the Boot Drive Sequence.
Enables boot-up from the hard disk drive.
83