Checking The Battery Status; Connecting The E105 To A Mobile Device - VeriFone e105 Installation Manual

Checking the
Battery Status
Connecting the
e105 to a Mobile
Device
To avoid errors, make sure that the e105 has enough power to perform a
transaction. Press and hold down the Backspace (<) key on the keypad to check
the battery status.
Table 4 Battery Percentage Status
Percentage
100%
75% LED 1, LED 2, LED 3
50%
25%
To connect to a mobile device, position the e105 on top of the mobile device with
the screen facing backward. Insert the audio plug on the e105 to the mobile
device's audio jack in a smooth, continuous motion until it seats firmly. Make sure
that the mobile device has enough power or is connected to a power source as
the e105 does not support pass-through charging.
Figure 3 Inserting the e105 into a mobile device
LED LED Color
All four LEDs
LED 1, LED 2
LED 1
* * * *

Checking the Battery Status

Behavior
Blue Solid
Blue Solid
Blue Solid
Blue Solid
105 I
E NSTALLATION
S
ETUP
15
G
UIDE