Miele AWG 102 Operating And Installation Instructions page 15

^ Remove the roofing around the
installation area.
^ Bend flashing a upwards.
^ Position the motor unit on the roof
with the air outlet directed down the
roof.
^ Secure the motor unit to the roof
substructure with fixing plate b.
^ Replace the roofing. Press down on
the flashing to ensure that it creates a
proper seal.
^ The flashing should be fitted under
the roofing at the top of the motor unit
and above the roofing at the sides
and bottom of the motor unit.
^ Push the flexible vent ducting onto
the stub of the motor unit and secure
it with a hose clip.
Installation
15