Samsung 3 SERIES User Manual page 23

:>
Temporary image retention may occur when viewing a static image on the set
for more than two hours.
:>
After selecting "Zoom1", "Zoom2" or "Wide Fit":
Press the'" or
~
button to select "Position", then press the ENTER G
button. Press the. or
T
button to move the picture up and down.
Reset: Press the'" or
~
button to select "Reset", then press the ENTER G
button. You can initialize the setting.
:>
After selecting "Just Scan" in HOMI (1080i) or Component (1080i) mode:
Press the. or T button to select "H-Position" or "V-Position", then press the
ENTER button.
Press the'" or
~
button to adjust the screen Position. Press the
ENTER
G
b tton.
Reset: Press the. or T button to select "Reset", then press the ENTER G
button. You can initialize the setting.
:>
HD (High Definition)
16:9 - 1080i (1920x1 080), 720p (1280x720)
:>
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Input Source
TV, Video, S-Video, Component (480i, 480p)
DTV(1080i), Component (1080i), HDMI (720p, 1080i)
PC
~ Alternately, you can press the P.SIZE button on the remote control repeatedly to
change the picture size.
~lide
16:9
Adjusts the picture size to Wide appropriate Sets the picture to 16:9 wide mode.
for DVDs or wide broadcasting.
Zoom1, Zoom2, 4:3
GD
(MENU)
~
@.~OSIZE)
(FAVCH)
Zoom1
Magnifies the size of the picture on the
screen.
Zoom2
Magnifies the size of the picture more
than "Zoom1".
illJst
Scan
Use the function to see the full
image without any cutoff when HDMI
(i'20p/1080i), Component (1080i) or
DW (1080i) signals are input.
Wide Fit
Enlarges the aspect ratio of the picture
to
fit the entire screen.
4:3
Sets the picture to 4:3 normal mode.