Adjusting Monitor Brightness - Olympus XZ-1 Instruction Manual

Resetting fi le numbering [File Name] Resetting fi le numbering [File Name]
x (Setup menu)
File Name
Folder name Folder name
DCIM 100OLYMP
999OLYMP
Automatic
numbering
P m dd
Submenu 2
File numbering is reset when a new
Reset card is inserted
organizing images by card).
When a new card is inserted, fi le
and folder numbering continue from
Auto the previous card (choose when
organizing images by fi le and folder
number).
Folder numbering is reset to 100, fi le numbering to
*1
0001.
For information on using the menus, see "Using the Menus" (p. 6).
File name
Pmdd0001.jpg
Pmdd9999.jpg
Automatic
numbering
Month: 1 to C
(A=October,
B=November,
C=December)
Day: 01 to 31
Application
(choose when
*1
Adjusting the CCD and the image Adjusting the CCD and the image
processing function [Pixel Mapping] processing function [Pixel Mapping]
x (Setup menu)
Pixel Mapping
This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
For best results, wait at least one minute after taking
or viewing pictures before performing pixel mapping.
If the camera is turned off during pixel mapping, be
sure to perform it again.
To adjust the CCD and the image To adjust the CCD and the image
processing function processing function
Press A when [Start] (Submenu 2) is displayed.
●
The camera checks and adjusts the CCD and the
image processing function at the same time.
Adjusting the brightness of the monitor Adjusting the brightness of the monitor
[ [ s s ] ]
x (Setup menu) s

Adjusting monitor brightness

Adjusting monitor brightness
1 Use FG to adjust (the effect can be viewed in the
monitor), and then press A.
Back
s
Set
59
EN