Protecting Images - Olympus E-5 Instruction Manual

Protecting images

Protect images you do not want to erase. Protected images cannot be erased by the single-
frame or all-frame erase function.
Single-frame protect
Play back the image you want to protect and press the 0
button.
• 9 (protect mark) is displayed on the top right corner of the
screen.
To cancel the protection
Display the images that are protected and press the 0
button.
Protecting selected frames
This function lets you select multiple images and protect them at the same time during
index display.
1
Display the images you want to protect and press the i button.
• The selected images will be shown with v.
• To cancel your selection, press the i button again.
• Press p to select the images you want to protect and press the i button.
2
After you have selected the images to protect, press the 0 button.
Canceling all protections
This function lets you cancel the protection of several images at one time.
1
MENU [q] [RESET PROTECT]
2
Use ac to select [YES], then press the i button.
x
Notes
• Formatting the card erases all images even if they have been protected.
g"Formatting the card" (P. 136)
• Protected images cannot be rotated even when the F button is pressed.
0 button
i button
7
97
EN