Networking Problems - Lenovo THINKCENTRE M79 User Manual

– For Windows 10: Click Display settings. On the Display tab, click Advanced display settings ➙
Display adapter properties.
3. Click the Monitor tab, and then reset the refresh rate to be the highest and noninterlaced.
The image is discolored
Solution: The monitor might be affected by interference from nearby equipment. Move fluorescent desk
lighting or any equipment that produces magnetic fields further away from the monitor. If the problem
persists, do the following:
1. Turn off the monitor.
2. Adjust the placement of the monitor and other devices so that they are at least 305 mm (12 inches) apart.
3. Turn on the monitor.

Networking problems

This section provides solutions to networking-related problems.
Ethernet problems
My computer cannot be connected to the network
Solutions:
• Connect the cable from the Ethernet connector to the RJ45 connector of the hub.
• Have the latest device driver installed on your computer.
To check whether you are using the latest device driver, do one of the following:
– On Windows 7:
1. Click Start ➙ Control Panel.
2. Click Hardware and Sound.
3. Click Device Manager. Type the administrator password or provide confirmation if prompted.
4. If an exclamation mark is displayed next to an adapter name under Network adapters, the adapter
driver might not be the latest or is disabled. Right-click the highlighted adapter to update the driver.
5. Click Update Driver Software, and then follow the instructions on the screen.
– On Windows 8.1:
1. Open Control Panel. For more information, see "Accessing Control Panel on the Windows 8.1
operating system" on page 21.
2. Click Hardware and Sound.
3. Click Device Manager. Type the administrator password or provide confirmation if prompted.
4. If an exclamation mark is displayed next to an adapter name under Network adapters, the adapter
driver might not be correct or is disabled. Right-click the highlighted adapter to update the driver.
5. Click Update Driver Software, and then follow the instructions on the screen.
• Set the same duplex for the switch port and the adapter.
If you configured the adapter for full duplex, ensure that the switch port is also configured for full duplex.
Setting the wrong duplex mode might degrade performance, cause data loss, or result in lost connections.
• Install all networking software that is necessary for your network environment.
Check with your LAN administrator for the necessary networking software.
54
ThinkCentre M79 User Guide