3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 70.
4. Locate the thermal sensor. See "Locating components" on page 5.
5. Disconnect the thermal sensor cable from the thermal sensor connector on the system board. See
"Locating parts on the system board" on page 6.
6. From the inner side of the chassis, pivot the retaining clip
side to release it. Then disengage the thermal-sensor plastic holder from the chassis.
Figure 40. Removing the thermal sensor
7. Pull the entire thermal sensor out of the chassis.
94
ThinkCentre M79 User Guide
1
inward and then push the clip to the outer