Eizo FlexScan S1501-B User Manual page 25

Problems
8. Afterimages appear.
9. Green/red/blue/white dots or defective dots remain
on the screen.
10. Interference patterns or pressure marks remain on
the screen.
11. The display image is appeared in lengthwise.
12. The Main menu of Adjustment menu does not start. • Check for Adjustment Lock function.
13. The auto-adjustment function does not work
correctly.
14. No audio output
Possible cause and remedy
• Use a screen saver or off timer function for a long-time
image display.
• Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
• This is due to LCD panel characteristics and is not a
failure.
• Leave the monitor with a white or black screen. The
symptom may disappear.
• Check whether the kind of cables connected with the
monitor and the PC. (Connect the monitor and cables
correctly by referring to "Connecting Cables" in Setup
Manual (page 3).)
• Check whether the FineContrast menu is running. (Refer
to "1-3 Functions and Basic
• This function does not work when digital signal is input.
• This function works correctly when an image is fully
displayed over the display area.
It does not work properly when an image is displayed
only on a part of the screen (DOS prompt window, for
example) or when a black background (wallpaper, etc.) is
in use.
This function does not work correctly with some graphics
boards.
• Check whether volume is set to "0".
• Check the settings of the PC and the audio playback
software.
Chapter 4 Troubleshooting
Operation" on page 9.)
23