Eizo FlexScan S1501-B User Manual page 15

3
Perform advanced adjustments for the following using the
<Screen> menu of the Adjustment menu.
● To eliminate vertical bars [Clock]
(1) Choose <Clock> from the <Screen> menu, and press
The <Clock> menu appears.
(2) Adjust the clock with
The adjustment is completed.
● To remove flickering or blurring [Phase]
(1) Choose <Phase> from the <Screen> menu, and press
The <Phase> menu appears.
(2) Adjust the phase with
The adjustment is completed.
● To correct screen position
[Hor. Position], [Ver. Position]
Since the number of pixels and the pixel positions are fixed on
the LCD monitor, only one position is provided to display images
correctly. The position adjustment is made to shift an image to the
correct position.
(1) Choose <Hor. Position> and or <Ver. Position> from the <Screen>
menu, and press
The <Hor. Position> or <Ver. Position> menu appears.
(2) Adjust the position with
in the display area of the monitor.
or , and press
or , and press
.
or to display the image properly
Note
• Press the control button slowly so as
• When blurring, flickering or bars
.
.
Attention
• Flickering or blurring may not be
Note
• When vertical bars appear on the
.
.
Chapter 2 Settings and Adjustments
not to miss the adjustment point.
appear on the screen after adjustment,
proceed to [Phase] to remove
flickering or blurring.
eliminated depending on your PC or
graphics board.
screen after adjustment, go back to
"To eliminate vertical bars [Clock]."
(Clock → Phase → Position)
13