Adjusting For Comfort And Stability; Troubleshooting; Using The Clothing Clip - Bose mie2i Owner's Manual

Adjusting for comfort and stability
There are several ways you can adjust your headset to provide
additional comfort and stability. Using the adjustment slider and
clothing clip you can customize how you wear your headset.
No audio/Intermittent
•
Make sure that the headset plug is securely
connected to the headphone jack.
•
Try another audio device.
Excessive bass
•
Turn off any audio enhancement features on
the audio source.
Microphone is not
•
Make sure that the headset plug is securely
picking-up sound connected to the headphone jack.
•
Make sure the microphone is not being
blocked or covered
The microphone is located on the back of the
Answer/End button (you may notice the
small opening for the microphone).
Phone not
•
Make sure that the headset plug is securely
responding to button connected to the headphone jack.
presses
•
For multi-press functions: Vary speed of
presses.
Apple product not
•
Full controls may not be available for some
responding to remote
Apple products.
Ear tips falling off
•
Make sure the ear tips are securely attached
to the earpiece and nozzle hook.
Lost ear tip
•
Visit owners.Bose.com for replacement tips.
Sound is muffled
•
Make sure ear tips and headset nozzles are
from earpiece clear of any debris or wax build-up.
•
Unplug the headset from the audio source,
then plug back in making sure they are
securely connected.
•
Try another audio device.
Troubleshooting
If you experience any trouble using your headset, try the following
troubleshooting instructions. If you still need help, see the contact
information on the inside back cover for assistance in your area.
Problem What to do
~~L
I
I
Using a single earpiece
The Bose® MIE2i mobile headset can be used with only the
right (R) earpiece in your ear. This allows you to take calls and
still hear surrounding sounds.
Using the clothing clip
Use the clothing clip to fasten the cable to
your clothing, for convenience, stability, and
to help manage the cable. This can be helpful
during high-movement activities or when
using the headset in a single earpiece
configuration.
Using the adjustment slider
Move the adjustment slider up or down to reduce
t
or increase the amount of loose cord between the
left and right earpiece. Finding the right position
for the slider can help optimize the placement of
the Answer/End button and integrated
microphone.
4