Operation Panel - Marrison MD Series User Manual

3-4 Operation Panel

STEP 1, Let the printer enter Dump Mode
(For Desktop printer EZ100/EZ300/EZ500 series)
1. Power off the printer, press and hold the FEED key.
2. Power on the printer (while still holding the FEED key).
3. There are 3 serial short beeps first, then, 3 single beep.
rd
Release FEED key when heard the 3 beep.
STEP 2. Make sure Printer ready for print a label
STEP 3. Send a label or commands which met problem to the printer
STEP 4. Printer will print out a label with letters and numbers, please
take a picture on them and send us by email.
To cancel (get out of) the Dump Mode, please press the FEED key, and then the printer will
automatically print "OUT OF DUMP MODE." This indicates that the printer is back to the standby mode.
22