Label Size Calibration And Self Test Page - Marrison MD Series User Manual

3-3

Label size calibration and Self Test Page

The printer can automatically detect and store label height.
That means the host computer does not need to transmit the label height to the printer.
And the self-test function lets you check whether the printer is functioning normally.
Here is how you run the label size calibration and self test.
STEP-01 Check that the paper is loaded correctly.
button.
STEP-02 Switch off the printer and press Feed
STEP-03 Switch the printer on again, keeping the FEED button pressed. When the LED starts to flash red, release
the FEED button. The printer will now measure the label stock and store the label height.
STEP-04 Once the printer has successfully measured the label stock, it will print a self-test label.
Contents of a self-test printout are listed below.
(The data below is for reference only, actual result may vary according to each situation.)
21