Download  Print this page

Honeywell DELTA21 Operator's Manual page 5

Cassette tape loader
Hide thumbs

Advertisement

DUMP
Press either
~
i
~
or
~
:
~followed
by
~~.'.:"~to
select a dump operation from the
Cassett~
Operations menu. When
ENTER TAPE HEADER (UP TO 79 CHARACTERS)
&
PRESS EXECUTE: is displayed, enter a tape heading and
press~~~.
- If either **ERROR - INPUT INCORRECT or **ERROR - ILLEGAL KEY SEQUENCE is displayed, reenter
heading and press
I
~~~I
.
- If CASSETTE OPERATION FAILURE is displayed, check cable connections and verify that the tape loader is
powered.
- If this is the first cassette operation, there will be a 92-second wait for the DELTA 21 System to become quiescent.
Any Primary Initiator Key (Fig. 3) pressed at this time will be honored after the wait.
The display in Figure 7 indicates that the ECU data file is being dumped to the cassette. The tape loader's RECEIVE
DATA and READY lights are flickering and the FORWARD light is on continuously. If any errors occur, tape loader
software will attempt to recover from them.
I
I
I
-CASSETTE OPERATION: DUMP
SIDE: 1
THIS IS THE UP-TO 79 COLUMN TAPE HEADER MESSAGE LINE.
ERRORS DISPLAYED
PRESS EXECUTE TO
ON THIS LINE
.....--ili
CONTINUE~
PRESS CLEAR TO ABORT
&
**CASSETTE REWIND FAILURE
**DATA FILE ERROR
**BUBBLE FILE ERROR
**WRITE ERROR
PLEASE INSERT NEW TAPE SIDE
&
THIS PROMPT APPEARS ONLY IF AN ERROR IS DISPLAYED ON THE LINE ABOVE IT.
Fig. 7. Data File Being Dumped to Cassette.
85-0087
4
20217

Advertisement

Table of Contents
loading