Advertisement
OPERATIONS----------------------------------
l. Place Cassette Tape (15735138-001) in the tape transport.
NOTE: To write-protect copies of the data file, rotate.plastic tab on the top edge of the cassette to expose opening.
2. Press the INITIALIZE switch on the tape loader and wait for the tape to rewind.
3. Dump, load, and verify operations are selected through menu penetration (Fig. 2).
4. Press
on the VDT keyboard (Fig. 3) to select the Building Management Packages menu (Fig. 4).
5.
Press~
i
~followed
by
to select the Initial Set-Up menu (Fig. 5).
6.
Press~
i
@
~
!]and
to select CASSETTE OPERATIONS (Fig. 6) from the Initial Set-Up menu.
7. Turn to DUMP, LOAD, or VERIFY sections to continue the desired operation.
SELECT
BUILDING
MANAGEMENT
PACKAGES
I
SELECT
INITIAL
START-UP
I
SELECT
CASSETTE
OPERATIONS
I
SELECT
DUMP,
LOAD, OR
VERIFY
20213
Fig. 2. Menu Penetration for Cassette Operations.
PRIMARY INITIATOR KEYS
SECONDARY INITIATOR KEYS
X204l
Fig. 3. Video Display Terminal Keyboard.
Advertisement
