Download  Print this page

Honeywell DELTA21 Operator's Manual page 8

Cassette tape loader
Hide thumbs

Advertisement

**READ ERRORS ENCOUNTERED
&
CASSETTE OPERATION COMPLETE
PRESS EXECUTE TO CONTINUE
PRESS CLEAR
'IO
ABORT
&
&
THIS MESSAGE IS DISPLAYED ONLY IF RECOVERABLE READ ERRORS OCCURED.
&
SINCE THE OPERATION IS COMPLETE THIS MESSAGE IS NO LONGER VALID.
Fig. 10. Completed Load Operation.
VERIFY
NOTE: Be sure tapes are inserted in the tape transport in the order that the data file was dumped.
20220
Press either
~'f~ or~ ~ ~followed
by
~!fmUto
select a verify operation from the Cassette Operations menu.
- If
either **ERROR - INPUT INCORRECT or **ERROR - ILLEGAL KEY SEQUENCE is displayed, reenter
selection and
press~~~.
\
- If
CASSETTE OPERATION FAILURE is displayed, check cable connections and verify that the tape loader is
powered.
- If
this is thf first cassette operation, there
will
be a 92-second wait for the DELTA 21 System to become quiescent.
Any Primary Initiator Key (Fig 3) pressed at this time will be honored after the wait.
The display in Figure 11 indicates that the data file in RAM or bubble memory is now being verified with the contents
of the cassette. The TRANSMIT DATA, RECEIVE DATA, and READY lights are flickering and the FORWARD light
is on continuously.
,
Some error messages may be printed on the SARA 11 Printer; READ ERROR ENCOUNTERED and BAD TAPE
FILE ENCOUNTERED. Tape loader software will attempt to recover from these errors.
- If
an unrecoverable error occurs:
Either
~3 or~
cLR ij returns control to the Cassette Operations menu.
Any PIK
except~cLR
ij leaves cassette operations and goes to the selected menu.
- If
no error or a recoverable error occurs:
The~
cLR
ij
aborts the load operation and returns control to the Cassette Operations menu.
Any PIK
except~cLR
ijaborts the load operation, leaves cassette operations, and goes to the selected menu.
- If
either PLEASE INSERT NEWT APE SIDE or WRONG SIDE. PLEASE INSERT SIDE nn is displayed:
Insert new (or correct) tape side, press INITIALIZE switch on the tape loader, and then press
~'l'Wl~to
continue the
verify operation.
The~
eu1 ij aborts
t~
verify operation and returns control to the Cassette Operations menu.
Any PIK
except~eu1
ijaborts the verify operation, leaves cassette operations, and goes to the selected menu.
- If
the verify ?peration is successful, the display in Figure 12 appears.
Either~ ~ijor~cLR
ijreturns control to the Cas-
sette Operations menu.
Any PIK
except~cLR
ij1eaves cassette operations and goes to the selected menu.
7
R.~-OOR7

Advertisement

Table of Contents
loading