Setting Option Setup Method; Type A(Setting Option) - Samsung NS100SSXEA Service Manual

4-3 Setting Option Setup Method

4-3-1 Type A(Setting Option)

Step 1 : Enter the Option Setup mode.
st
1 Take out the batteries of remote control.
Press the temperature
nd
2
and insert the battery again.
3 rd
Make sure the remocon display shown as
Step 2 : Enter the Option Setup mode and select your option according to the following procedure.
Setting is not required if you must
a volue which has a
Samsung Electronics
NS090SDXEA_E_SM_33623A(1)_1.indd 4
Option No. :
button simultaneously
1
The default value is .
Otherwise, push the
Every time you push the button, the display panel reads or
2
Push the
1
Every time you push the button, the display panel reads    . . .
2
       repeatedly.
3
3
4
Push the
Every time you push the button, the display panel reads    . . .
5
       repeatedly.
6
4
Push the
Every time you push the button, the display panel reads    . . .
       repeatedly.
5
Push the
Every time you push the button, the display panel reads    . . .
       repeatedly.
6
Push the
Every time you push the button, the display panel reads    . . .
default.
       repeatedly.
.
button to .
button to set the display panel to .
button to set the display panel to .
button to set the display panel to .
button to set the display panel to .
button to set the display panel to .
repeatedly.
4-4
2011-04-08 10:55:05